A Mechanical Evaluation of Two Fixation Methods Using Cancellous Screws for Coronal Fractures of the Lateral Condyle of the Distal Femur (Ota Type 33b).
From: Department of Orthopaedic Surgery, NYU-Hospital for Joint Diseases, New York, NY 10003, USA.
Journal of orthopaedic trauma
- Publish Date: Apr 2006
- ISSN: 0890-5339
- Volume: 20
- Issue: 4
- Pages: 273-6
- Medium: Print
- Language: English
- Citation (JAMA): Jarit Gregg J, Kummer Frederick J, Gibber Marc J, et al. A Mechanical Evaluation of Two Fixation Methods Using Cancellous Screws for Coronal Fractures of the Lateral Condyle of the Distal Femur (Ota Type 33b).. Apr 2006;20:273-6
Abstract
PURPOSE: To compare the relative strength and stability of 2 fixation methods for displaced coronal shear fractures of the lateral femoral condyle (Hoffa fractures, OTA Type 33B3). SETTING: University Biomechanics laboratory. DESIGN: Eight matched pairs of embalmed femurs were divided into 2 groups and simulated Hoffa fractures were created. In each pair, 1 of the fractures was fixed with 2 screws placed in an anteroposterior direction, and in the other, the fracture was fixed with 2 screws placed in a posteroanterior direction. METHODS: All specimens were cyclically tested with simulated physiologic loading. Displacement of the femoral condyle was continuously measured to 10 cycles. The specimens were then loaded to failure. RESULTS: Fixation with posterior to anteriorly placed cancellous lag screws was significantly more stable than that with anterior to posteriorly placed screws at 10 cycles (P = 0.05), with 0.67 mm displacement compared to 1.36 mm, respectively. They were also more stable at 10, 100, and 1000 cycles; however, these displacements were not statistically significant. Fixation with posteriorly placed cancellous screws also had significantly higher ultimate strength (P = 0.04), 1700 N compared to 1025 N for anterior placement. CONCLUSION AND SIGNIFICANCE: Lag screws placed posterior to anterior provided more stable fixation of Hoffa fractures in embalmed femurs than anteroposteriorly placed lag screws. This finding may apply in the clinical setting; however, this technique requires that the screw heads be recessed beneath the articular surface. The effects of the cartilage defects so created are not known. The choice of technique is also determined by concomitant fractures and the exposure required for their fixation.
Mesh Headings (Keywords): Aged, Biomechanics, Bone Screws, Elasticity, Equipment Failure Analysis, Female, Femoral Fractures, Fracture Fixation, Internal, Humans, Male, Middle Aged, Motion, Stress, Mechanical, Treatment Outcome
Check for Full Text / PubMed Unique Identifier (PMID): 16721243
This abstract is part of PubMed, a service of the U.S. National Library of Medicine. PubMed includes more than 17 million citations from MEDLINE and other life science journals for biomedical articles. See Copyright and Disclaimers.
Linked medical terms appearing on this page are added by Healia to help readers find more information and are not part of the original PubMed document.
The data herein was last updated on July 8th, 2008 and may not reflect the most current and accurate data available from NLM.